Metallic Magic Black Purple Matte Car Wrap | Polymeric Vinyl

Regular price $200.00 USD
Size: 1.52*6m(5*20ft)
Color: Magic Black Purple

🎉 Free Shipping! Ready to ship

Metallic Magic Black Purple Matte Car Wrap | Polymeric Vinyl
$200.00 USD
1.52*6m(5*20ft) / Magic Black Purple

Metallic Magic Black Purple sits in that quiet zone between deep black and rich purple. In low light it reads as a flat, stealthy black. Catch it under sun or street lamps and a moody purple flash rolls across the panels. The finish is fully matte, so there is no gloss and no glare, just a soft non-reflective surface with a fine metallic shimmer worked into it.

This is a color-change wrap, not a clear film. It lays a new matte coat over your car and takes the daily hits of dust, light scratches, and weather so the factory paint underneath stays sealed and clean. When you are ready for a change, it comes back off and your original paint is still there.

Side-by-side of Metallic Magic Black Purple matte vinyl wrap versus a matte respray, showing the wrap is cheaper and reversible

Key features

  • Flat matte finish: a non-reflective topcoat gives the factory-flat, no-shine look that paint cannot match without a costly custom job.
  • Hides minor flaws: the matte surface softens light, so it disguises small swirls and imperfections instead of spotlighting them like gloss does.
  • Air-release adhesive: built-in air channels push bubbles out, so the film lays flat and you can reposition as you work.
  • Conforms to curves: the polymeric PVC stretches over mirrors, bumpers and body lines for a smooth, seamless wrap.
  • Protects the paint underneath: the wrap takes the daily wear while your factory paint stays sealed and original.
  • Removable: peels off cleanly later with heat, so you can change the look or go back to stock.
  • UV and weather resistant: the topcoat holds up to sun and rain across a -30 to +140 degree range.

How a wrapteck matte wrap is built

Layer diagram of Metallic Magic Black Purple matte vinyl wrap showing the matte PVC face, air-release acrylic adhesive, and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Matte (flat, non-reflective)
Face film thickness 3.7 to 4.1mil
PVC face film 90 micron
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic, 75 micron
Heat resistance -30 to +140°C
Roll width 1.52m (5ft)
Roll lengths 6m, 18m and 23m
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.

Frequently asked questions

How long does this matte wrap last?

With good care, Metallic Magic Black Purple holds its flat black-to-purple look for years. A car that lives in a garage or under cover lasts longer than one parked in full sun every day. Heat, harsh weather, and rough washing are what wear a matte wrap down fastest, so gentle treatment keeps the finish looking fresh.

Will the wrap protect or damage my paint?

It protects it. The vinyl sits over your factory paint and takes the dust, light scratches, and grime that would otherwise hit the clear coat. The Henkel air-release acrylic adhesive is made to bond well and then release cleanly later. As long as your existing paint is sound and not flaking, the wrap shields it rather than harming it.

Why pick a matte wrap over a matte respray?

A matte paint job is one of the most expensive finishes a shop can spray, and it is very hard to repair without redoing whole panels. Metallic Magic Black Purple gives you that same flat stealth look for far less, goes on much faster, and comes off when you want without touching the paint underneath. A respray is permanent. This wrap is reversible.

How do I wash and care for a matte wrap?

This is the most important part. Never wax, polish, or machine-buff Metallic Magic Black Purple, because any of those creates shiny spots and ruins the flat finish. Hand wash only, with a soap made for matte surfaces. Skip automatic brush car washes. Wipe off fuel spills, bird mess, and bug splatter quickly before they sit, since those can stain a matte surface.

Can I install it myself?

Yes, many DIY installers do. The film has a Henkel solvent-based acrylic air-release adhesive, so the air channels let you push out bubbles and reposition as you work instead of fighting trapped air. You can run a dry or wet install. Take your time on curves and edges, use gentle heat to set it, and clean the panel fully before you start.

Does it remove cleanly later?

It does. The adhesive is built to hold firmly while it is on and then peel away without leaving a mess on sound factory paint. Warming the vinyl as you pull it helps it lift in clean sections. That clean removal is the whole point of a wrap, so you can switch your color or go back to stock paint whenever you like.

Will it stay flat or start to look shiny?

It stays flat as long as you treat it as a matte surface. Metallic Magic Black Purple goes shiny only if it gets waxed, polished, buffed, or scrubbed hard with the wrong products. Stick to hand washing with matte-safe soap and the flat, non-reflective look holds. The metallic flake is built into the film, so the purple shift stays without any polishing.

How much film do I need for my car?

The rolls are 1.52m (5ft) wide and come in 6m, 18m, and 23m lengths. A full wrap on most sedans takes around 18m, while larger SUVs and trucks usually need the 23m roll. The 6m length is handy for a roof, hood, mirrors, or trim accents. If you are between sizes, order up so you have extra for mistakes and complex curves.

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns