1 / 1

Midnight Purple Gloss Metallic Vinyl Wrap | PET Liner
$200.00 USD
Size: 1.52*6m(5*20ft)
Color: Midnight Purple

💪 Hurry up! Only 8 left

Midnight Purple Gloss Metallic Vinyl Wrap | PET Liner
$200.00 USD
1.52*6m(5*20ft) / Midnight Purple
View details

Midnight Purple shifts from a deep inky violet in the shade to a bright sparkle the moment the sun hits it, because the fine metal flake suspended in the film throws light back at you. The gloss surface acts like a mirror, so every curve of your panel reads sharp and wet-looking.

It is built on polymeric PVC with a 4.1mil face film, so it behaves like a real finish rather than a sticker. Best of all, it is reversible. You get the look of a costly metallic color change without touching your factory paint, and you can peel it off or switch colors later when you want something new.

Key features

  • Polymeric PVC face film at 4.1mil with a gloss metallic finish and fine metal flake for a deep, light-catching sparkle.
  • Henkel solvent-based acrylic air-release adhesive at 1.6mil, so you can reposition during the lay-down and push air out as you go.
  • PET plastic release liner with double-layer lamination for a super air-release exhaust channel that leaves a smooth, orange-peel-free result.
  • The PET liner stretches and the color holds when stretched, so it pulls cleanly over mirrors, bumpers, and curved panels without going patchy.
  • Heat resistance from -30C to +140C, so the finish stands up to cold mornings and hot post-heat sessions alike.
  • Choose 30ft (9m) or 59ft (18m) rolls, and install dry or wet to suit your method and your panel.
Side-by-side comparison showing a reversible Midnight Purple gloss metallic vinyl wrap next to a permanent metallic respray, highlighting that the wrap is faster, peels off, and lets you change color later.

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic (fine metal flake)
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install
Diagram showing how fine metal flake inside the gloss vinyl reflects sunlight, appearing as a bright sparkling violet in direct sun and a deep dark purple in the shade.

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Midnight Purple Gloss Metallic Vinyl Wrap | PET Liner
  • Midnight Purple Gloss Metallic Vinyl Wrap | PET Liner
  • Midnight Purple Gloss Metallic Vinyl Wrap | PET Liner
  • Midnight Purple Gloss Metallic Vinyl Wrap | PET Liner
1 / 1

Frequently asked questions

How does Midnight Purple look in sunlight versus shade?

In direct sun the fine metal flake lights up and the purple reads bright and sparkly with a clear shift toward violet. In shade or indoors it settles into a deep, dark inky purple. That swing between the two is exactly what makes a gloss metallic flake film fun to look at on a moving car.
Can I wrap a full car in Midnight Purple, or is it better for accents?

Both work. A full wrap gives you that one-color show finish where the flake flows across every panel, while accents like the roof, mirrors, or hood let you add a metallic pop against your existing color. Order the 59ft roll for full vehicles and the 30ft roll for partial jobs and accents.
Does this wrap remove cleanly later?

Yes. It is a vinyl wrap applied over your factory paint, so it is meant to be reversible. When you want to change the look you peel it off, which is one of the main reasons people choose a metallic wrap over a permanent respray.
How do I wash a gloss metallic wrap to keep the shine?

Hand wash with a pH-neutral soap and a soft mitt, rinse well, and dry with a clean microfiber towel. Avoid harsh brushes and aggressive automatic car washes, since the gentler you are the longer the gloss surface keeps its mirror-like reflection and the flake stays crisp.
Should I install dry or wet?

You can do either. Dry install gives you the strongest grab and is the common choice for experienced hands, while a wet install gives you more time to slide the film into place on large flat panels. The air-release adhesive and exhaust-channel liner help push bubbles out either way.
How is this different from a solid gloss wrap?

A solid gloss is one flat color with a shine. This film has fine metal flake mixed into the gloss, so instead of a single tone you get depth and sparkle that changes with the light and the viewing angle. Up close you can actually see the flake catching light.
How is a metallic wrap different from a metallic respray?

A respray is permanent, takes your car off the road for days, and locks you into that color. This wrap gives you a similar metallic look, goes on faster, sits over your original paint, and can be peeled off or swapped for a different color whenever you want a change.
Will the metallic finish hold up to daily driving?

It is made for it. The 4.1mil polymeric PVC face film handles temperatures from -30C to +140C, and the gloss surface resists everyday road grime. With gentle hand washing and normal care the flake and shine stay looking sharp through regular use.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns