1 / 1

Liquid Dragon Red Metallic Car Wrap | Gloss Vinyl
$200.00 USD
Size: 1.52*6m(5*20ft)
颜色: Liquid Dragon Red

💪 Hurry up! Only 8 left

Liquid Dragon Red Metallic Car Wrap | Gloss Vinyl
$200.00 USD
1.52*6m(5*20ft) / Liquid Dragon Red
View details

Liquid Dragon Red is a deep glossy red built on fine metal flake that lives inside the color layer. In the shade it reads rich and dark, almost like a candy red with serious depth. Roll it into direct sun and the flake wakes up, throwing tiny points of sparkle across every panel and giving the curves a wet, liquid shine. It is the look of a custom metallic respray without the body shop bill.

This is a gloss color-change wrap, so it changes how your car looks while it guards the factory paint underneath from daily wear, light scratches, and sun. When you are ready for a new color or want the original paint back, it comes off cleanly. You get a bold metallic finish that you can put on yourself and take back off later.

Liquid Dragon Red metallic vinyl wrap on a car next to a costly custom metallic respray, showing the wrap as the cheaper reversible choice

Key features

  • Deep metallic sparkle: fine metal flake runs through the color layer, so the finish reads rich in the shade and glints with sparkle in direct sun.
  • Glossy depth: a clear topcoat over the flake gives a wet, glossy shine with real depth, the same look factory metallic paint gets from flake in the base coat.
  • Air-release adhesive: built-in air channels in the Henkel solvent-based acrylic let bubbles push out to the edge as you work, so the film lays flat and you can reposition while you install.
  • Conforms to curves: polymeric PVC stretches over mirrors, bumpers and body lines so the color wraps seamlessly instead of creasing.
  • Protects the paint underneath: the vinyl takes the daily wear, light scratches and UV load so your factory finish stays sealed and original.
  • Removable: a heat gun and a slow, low-angle peel pulls it off cleanly when you are ready for a change.

How a wrapteck metallic wrap works

Diagram of the Liquid Dragon Red wrap layer structure showing the gloss face film, metal flake color layer, air-release adhesive, and PET liner

Specifications

Material Polymeric PVC vinyl
Finish Gloss metallic, fine metal flake
Face film thickness 4.1mil
Adhesive Henkel solvent-based acrylic, air-release
Adhesive thickness 1.6mil
Release liner PET plastic
Heat resistance -30 to +140°C
Roll length 30ft (9m) or 59ft (18m)
Application Dry or wet install

New to wrapping?

If this is your first wrap, start with our guide on how to wrap a car. The air-release adhesive makes panels and accents very DIY friendly, and a professional installer is the safest route for a full-car wrap.
  • Liquid Dragon Red Metallic Car Wrap | Gloss Vinyl
  • Liquid Dragon Red Metallic Car Wrap | Gloss Vinyl
  • Liquid Dragon Red Metallic Car Wrap | Gloss Vinyl
  • Liquid Dragon Red Metallic Car Wrap | Gloss Vinyl
  • Liquid Dragon Red Metallic Car Wrap | Gloss Vinyl
1 / 1

Frequently asked questions

What does the metallic flake actually do on Liquid Dragon Red?

The fine metal flake sits inside the red color layer, so light catches it and scatters back as tiny sparkles. That is what gives this red its depth and that liquid, multi-dimensional shine instead of looking like one flat sheet of color.
How different does it look in sun versus shade?

A lot. In shade or indoors Liquid Dragon Red goes deep and dark, closer to a candy red. Out in direct sunlight the flake lights up and the whole panel sparkles and glows. Many owners say it looks like two related colors depending on where the car is parked.
Is the surface textured or smooth?

The flake is in the color layer, not on top, so the gloss face film stays smooth to the touch. You see the sparkle but you feel a slick glossy surface, the same as you would expect from a fresh coat of glossy paint.
Will this wrap damage my paint or actually protect it?

It protects it. The vinyl shields your factory paint from sun, light scratches, and daily grime, and the air-release adhesive is made to come off cleanly later. On sound factory paint it guards the surface rather than harming it.
How is a metallic wrap better than a metallic respray?

A real metallic-flake respray is expensive, takes a body shop days, and is hard to fix or undo if you change your mind. This wrap costs far less, goes on faster, keeps your original paint safe underneath, and peels off when you want a new look. You get the metallic effect without locking yourself in.
How do I wash and care for Liquid Dragon Red?

Hand wash with a mild car shampoo and a soft mitt, rinse well, and pat dry to avoid water spots. Skip harsh solvents and stiff brushes. Keeping the car garaged out of constant sun helps the gloss and flake stay bright, and a well cared for wrap lasts for years.
Can I install this myself?

Yes. The solvent-based acrylic adhesive is air-release, so trapped bubbles push out to the edge as you squeegee instead of staying locked under the film. You can do a dry or wet install. Take your time on curves and recesses with a little heat and most DIY installers get clean results.
How much film do I need for my car?

It depends on your vehicle size and how much you are covering. We offer 30ft (9m) and 59ft (18m) roll lengths. A full small car usually needs the longer length, while a roof, hood, or accent piece can be done with the 30ft roll. Measure your panels and add a margin for trimming.

Related Products

  • Free Shipping

  • Secure payment

  • Contact our experts

  • Free Returns